Harvia Sauna - Sauna Heaters

Harvia Sauna
14010-B SW 72nd Ave.
Portland, OR 97224-0088
ph: (800) 665-7170
fax: (503) 684-1120
alt: (503) 684-8289
CustomerService@harviausa.com

Sauna Heaters

It's no wonder why Harvia Sauna heaters, made in Finland, have a world wide reputation. Engineered with the latest in Sauna heater technology, Harvia heaters are designed to deliver maximum performance and long life with greatest heating efficiency. Manufactured with high quality materials for increased dependability and durability, the sleek, modern lines, and stainless or silver/gray color, will complement your Sauna room.

In the Harvia heater, special peridotite (granite like) stones fill the entire body cavity and are directly heated by stainless steel elements. The stones filter the 1400° F heat and emit a soft, pleasant aura of high heat rather than the harsh blast of unfiltered elements. The directly heated stones also produce the best steam when water is ladled over them, to raise the Sauna's humidity level. In addition, the stones retain heat, reducing on/off cycling of the heater for greatest efficiency and ecomomy.

The Harvia heater is a combination of 21st Century technology, superior craftsmanship, and age-old tradition. It is the heart of the Sauna and it is designed to give you endless hours of pure Sauna pleasure.

All of our heaters take about 25 to 30 minutes to heat up the Sauna room (except the Ever Ready AV which is always ready for use). After the initial heat up, water may be poured on any of our heaters to provide soothing steam.

Model JM Compact
Size--12" w x 9" d x 25" h, mounts on the wall, min. 6" off floor
Power--120v/1ph. for 1.7kw & 2kw, 240v/1ph. for 3kw
Controls--Built-in controls with silent 60 min. timer, 1 to 8 hour delay feature, and thermostat for JM-17 & JM-20. JM-30 does not have the delay timer feature. Controls may be on left or right side of heater.
Material--Stainless Steel interior and exterior
Stones--20# shipped in heater box
Models & Min./Max Room Size--
Click here for heater specifications
Model KIP-B
Size--16" w x 11" d x 24" h, mounts on the wall 7" to 12" off floor
Power--240v/1ph. (3kw, 4.5kw, 6kw, & 8kw)
Controls--Built-in controls with silent 60 min. timer, 1 to 8 hour delay feature, and thermostat. Controls on the front but they may be changed to side mounted.
Material--Stainless steel interior & stainless elements with Baked Enamel casing
Stones--50#
Models & Min./Max Room Size--
- KIP-30-B1 (84-130 cu. ft.)
- KIP-45-B1 (100-210 cu. ft.)
- KIP-60-B1 (170-300 cu. ft.)
- KIP-80-B1 (250-425 cu. ft.)
Click here for heater specifications
Model KIP-W with Separate Wall Control
Size--16" w x 11" d x 24" h, mounts on the wall 7" to 12" off floor
Power--240v/1ph. or 208/3ph. (3kw, 4.5kw, 6kw, & 8kw)
Controls--F-1T, F-2T, or F-2 manual Wall Control or
Griffin CG170 digital Wall Control

Material--Stainless steel interior & stainless elements with Baked Enamel casing
Stones--50#
Models & Min./Max Room Size--
- KIP-30-W1 (84-130 cu. ft.)
- KIP-45-W1 or KIP-45-W3 (100-210 cu. ft.)
- KIP-60-W1 or KIP-60-W3 (170-300 cu. ft.)
- KIP-80-W1 or KIP-80-W3 (250-425 cu. ft.)
Click here for heater specifications
Model KV Topclass
Size--18" w x 10" d x 25" h, mounts on the wall 7" to 12" off floor
Power--240v/1ph (4.5kw, 6kw, & 8kw)
Controls--Built-in controls with silent 60 min. timer, 1 to 8 hour delay feature, and thermostat. Controls are located near the top and can be mounted on the left or right side of the heater.
Material--Stainless steel interior and exterior
Stones--50#
Models & Min./Max Room Size--
- KV-45-S (100-210 cu. ft.)
- KV-60-S (170-300 cu. ft.)
- KV-80-S (250-425 cu. ft.)
Click here for heater specifications
Club Model
Size--19 7/8" w x 17" d x 27 1/2" h, floor model

Power--240v/1ph. or 208/3ph. (10kw, 12.5kw, & 15kw)
Controls--F-2T or F-2 manual Wall Control or
Griffin CG170 digital Wall Control
Material--Stainless steel interior and exterior
Stones--132#
Models & Min./Max Room Size--
- K10G-U1 (240v/1ph) or K10G-U3 (208v/3ph), 388-600 cu. ft.
- K12.5G-U1 (240v/1ph) or K12.5G-U3 (208v/3ph), 494-742 cu. ft.
- K15G-U1 (240v/1ph) or K15G-U3 (208v/3ph), 600-989 cu. ft.
Click here for heater specifications
Model AV Ever Ready
Size--20" w x 21" d x 37" h, sets on the floor
Features--The AV Ever Ready heater is always ready for use. It uses an economical 250w element to maintain the heat inside the heater. When you are ready to take a Sauna just open the lid and pour some water on the stones. There is no heat up time. Temperatures get up to 170 degrees with the small element and you may turn on the booster element for higher temperatures. The Ever Ready provides the softest heat and can provide the most steam of any Sauna heater on the market. The Ever Ready will make you a Sauna enthusiast.
Power--240v/1ph. (4.4kw & 6.5kw)
Controls--Built on heater
Material--Stainless Steel interior and Stainless/Baked Enamel exterior
Stones--200#
Models & Min./Max Room Size--
- AV-4 (170-300 cu. ft.)
- AV-6 (200-400 cu. ft.)
Click here for heater specifications
Models F-1T & F-2T Wall Controls

Size--3 3/4" w x 3 1/2" d x 9 1/4" h rough in box size, flush mount
Features--60 min. timer with thermostat, heater indicator light, and light switch.
Power--Line voltage. F-1T does not need a separate contactor. F-2T requires proper model contactor.
Model F-2 Wall Control (for use with 24 hour time clock)

Size--3 3/4" w x 2 1/2" d x 9 1/4" h rough in box size, flush mount
Features--Thermostat, heater indicator light, and light switch. There is no timer. The F-2 control is to be used with a 24 hour time clock and may only be used at a commercial location where an attendant is present.
Power--Line voltage. Use with proper model contactor
Model FX Contactor
Features--The contactor is a magnetic relay required for some heater models. A contactor is required for use with 240v heaters 8kw and higher when an F-2T or F-2 manual wall control is used. It is also required on all 208v/3ph heaters that use the manual F-2T or F-2 wall control. Contactor may be surface or flush mounted.
Power--240v or 208v
Models & Size--
- FX303, FX402, FX404, FX503--all 6" w x 8" h x 4" d
Griffin CG170 Digital Wall Control
Size--3 5/8" w x 4 1/2" h x 1" d, surface mount

Color--Chrome finish

Features--The Griffin control can be used with KIP-W1 or W3 and Club model heaters.  Control has a 60 minute timer plus a 12 hour delay feature, operates room light, and has degrees F and C readings. Griffin comes with chrome finished Power Unit, temperature sensor with 13 feet of cable (connects to Power Unit), and 16.4 feet of data cable (connects control to Power Unit). Longer lengths of cable are available.
Power--Low Voltage fed from 240v or 208v Power Unit, surface mount

Models--

CG170-U1--For use with KIP-W1 and Club 240v/1ph heaters
Power Unit--10 1/2" w x 9 1/4" h x 3" d

CG170-U3--For use with KIP-W3 and Club K10G-U3, 208v/3ph heaters
                                                                      Power Unit--10 1/2" w x 9 1/4" h x 3" d

                                                                    CG170-U3-15--For use with Club K12.5G-U3 and K15G-U3, 208v/3ph heaters
                                                                      Power Unit--10 1/2" w x 10 3/4" h x 3" d

                                                                    Click here for heater specifications